1, Shaft (Shift Lever)
1, Shaft Pin (Shift Lever)
1, Bushing (D.E)
1, Bushing  (C.E)
1, Bushing (C.S)
1, Bushing (C.S)
4, Brush (12V)
2, Brush Holder (Ground)
2, Brush Holder (Field)
2, Brush Holder Pin
2, Brush Mounting Bracket
2, Brush Spring
1, Gasket (Solenoid)
1, Gasket (Starter Mounting)
1, Grommet (Motor Lead)
1, Oil Seal (C.S. Frame)
2, Insulator (Field Coil)
1, Insulator (C.E. Frame)
1, Connector (Field Coil to Solenoid)
2, Brush Ground Lead
1, Field Coil Lead
1, Retaining Ring
1, Stop Collar
1, Oil Wick
1, Thrust Collar
1, Pipe Plug
2, Hex Screw (Positive Brush)
2, Hex Screw (Negative Brush)
4, Hex nut (Brush Holder)
2, Hex Screw (Center Support)
1, Hex Screw (Solenoid Connector)
2, Hex Screw (Solenoid)
8, Phillips Screw (Pole Shoe)
4, Hex Nut (Brush Holder)
2. Square Conical Lock Washer (Center support)
4, Split Lock Washer (Brush Holder)
2, Conical Washer w/ Seal (Shift lever)
2, Lock Washer (Solenoid Mount)
2, Lock Washer (Shift lever)
2, Conical Washer w/ Seal (Shift lever)
1, Flat Washer (Armature C.E.)
1, Flat Washer (Armature C.E.)
1, Split Roll Pin (Field case)
1, Split Roll Pin (D.E. housing)
1, Brake Washer (3/4 ID)
1, Brake Washer (13/16 ID)
1, External Snap Ring